HX-974™ White
Brushable Mold Making Latex
A vulcanizable, high-viscosity white brushable latex made especially for vertical surface applications. With a higher viscosity than HX-80, HX-974 is ideal for making glove molds of 3-dimensional originals and statuary.
- Designed for vertical mold-making applications
- Ideal for glove molds and three-dimensional originals
- High-viscosity formula helps build thickness on vertical surfaces
- White color makes coverage easy to see during application
- Tintable with FabTone™ latex pigments
Product Overview
HX-974 White is a high-viscosity brushable latex designed for vertical mold-making applications. Its thicker consistency helps it cling to vertical surfaces and complex details without running.
Ideal for glove molds, statuary, and other three-dimensional originals, HX-974 provides excellent coverage and can be tinted with FabTone latex pigments.
Application Summary
- Designed for vertical and three-dimensional originals.
- Apply in successive brush coats until the desired mold thickness is achieved.
- Reinforce larger molds with gauze or cheesecloth as needed.
- Store and use at room temperature. Do not allow to freeze.
For complete instructions and technical details, refer to the Technical Bulletin.
Do not use if you have latex allergies. Store and use at room temperature (73°F/23°C); do not allow to freeze. Always consult the current Technical and Safety Data Sheets before use.
Documents
📄 Technical Bulletin ⚠ Safety Data Sheet (SDS)Documents hosted by Smooth-On, the manufacturer of Holden's Latex.
Related Products
HX-80™ Latex
HX-80 is a brushable, low-viscosity vulcanizable mold making latex with high wear resistance and low shrinkage. Best for molds of 2-dimensional flat pieces for architectural or decorative objects.
HX-CECO Powder™
HX-CECO Powder is a natural latex thickener, a specialty blend of powders and surfactants that thickens later coats to reach a desired mold thickness in less time, with fewer coats, while increasing the strength of the rubber mold.
HX-Castor Oil™
HX-Castor Oil is an excellent release agent for natural latex molds used to pour cement. It also acts as a parting agent between a latex mold and a plaster back-up shell, and has a rejuvenating effect that restores latex to its natural consistency after repeated use.
Ready to order HX-974 White Latex?
Holden's Latex is carried by our authorized distributors. Choose whichever seller works best for you.
See Where to Buy