Home / Tech Support
Technical Resources
Tech Support & Data Sheets
Everything you need to work confidently with Holden's Latex, from technical data sheets to safety documentation and expert help.
General Natural Latex Tips
- Store latex at room temperature and never allow it to freeze.
- Apply multiple thin coats rather than a few thick coats.
- Allow each coat to become tacky before applying the next.
- Use talc before demolding or storing cured latex.
- Use release agents when casting plaster or concrete.
- Keep cured latex away from oils, solvents and prolonged sunlight.
Always refer to the Technical Bulletin and Safety Data Sheet for product-specific instructions.
Need help?
Get technical support
Our distributors stock the Holden's Latex line and offer expert, hands-on technical support to help you select and use the right product.
Product Data Sheets
Download the Technical Bulletin (TB) and Safety Data Sheet (SDS) for any product below. Documents are hosted by Smooth-On, the manufacturer of Holden's Latex, so you always get the current version.
| Product | Category | Documents |
|---|---|---|
| HX-80 Latex | Mold Making | TB · SDS |
| HX-974 White Latex | Mold Making | TB · SDS |
| HX-CECO Powder | Additive | TB · SDS |
| HX-407 Latex | Mask Making | TB · SDS |
| HX-807 Latex | Coating / Casting | TB · SDS |
| HX-200 Latex | Coating / Dipping | TB · SDS |
| HX-Body Latex | Skin-Safe | TB · SDS |
| HX-Cosmetic Latex | Skin-Safe | TB · SDS |
| FabTone Colorants | Colorant | TB · SDS |
| HX-Stiffening Agent | Additive | TB · SDS |
| HX-Castor Oil | Release Agent | SDS |
| HX-Frisket Masking Latex | Masking | TB · SDS |
| HX-Injection Medium | Laboratory | TB · SDS |