Mold Rubber Natural Liquid Latex $25.00

A high solids molding rubber based on natural latex. Apply in layers. It is not pre-vulcanized and must be vulcanized by either post curing at 110°F for four hours or permitted to stay at room temperature for 5 days...

HX-80 Mold Making Liquid Latex Rubber $30.00

A high solids brush-able vulcanize-able Natural Liquid Latex Rubber for mold making.  HX-80 is compounded from specially processed Natural Latex with a high solids content, which minimizes shrinkage.  HX-80 is...

HX-874 Mold Making Liquid Latex Rubber $30.00

A very high solids brush-able vulcanize-able Natural Liquid Latex Rubber compound. A high solids latex for those who wish to make figurines, or products out of cement or plaster.  HX-874 Latex is a lower ammonia...

HX-660 Mold Making Liquid Latex Rubber $30.00

HX-660 Latex is the pre-vulcanized form of HX-80.  It was designed specifically for short run polyester work.  When polyester resins are cast into natural Latex, a tackiness develops on the surface of the rubber...

HX-80LA Low Ammonia Mold Making Liquid Latex Rubber $65.00

HX-80LA has the same characteristics as HX-80 ammoniated latex.  It is slightly lower in solids content but has less noticeable odor of ammonia. HX-80LA is a brush-able vulcanize-able Natural Latex compounded from...

CEMENTEX L-200 Casting Latex $30.00

The original CEMENTEX L-200 Casting Latex. L-200 is a pre-vulcanized casting Latex.  It is very useful for the production of hollow molded rubber articles, toys, hot-water bottles, rubber balls, imitation pottery,...

HX-200 Liquid Casting Latex $30.00

A liquid casting latex used for mask making, hollow casts, and coatings for styrene and clothing. HX-200 is a pre-vulcanized casting Latex.  It is very useful for the production of hollow molded rubber articles, toys,...

HX-407 Liquid Mask Making Latex $30.00

A thicker, higher viscosity casting latex used for mask making, hollow casts, and coatings for styrene and clothing. HX-407 is a pre-vulcanized casting Latex.  It is very useful for the production of hollow molded...

HX-807 Brushable Liquid Mask Making and Casting Latex $30.00

A thicker brush-able, high viscosity casting latex used for mask making, hollow casts, and coatings for styrene and clothing. HX-807 is a pre-vulcanized casting Latex.  It is very useful for the production of hollow...