HX-80 Latex

DOWNLOAD TECHNICAL BULLETIN DOWNLOAD SDS

HX-80 Brushable Mold Making Latex is a vulcanizable, low viscosity latex featuring high wear resistance and low shrinkage for concrete casting. Best for making molds of 2-dimensional flat pieces for architectural or decorative objects. Add color with FabTone pigments.  Once adequate coats are applied (generally between 10 as a minimum to 20 layers, depending on model), it cures to a highly elastic, wear resistant mold that captures perfect detail. Molds are suitable for casting plaster, concrete and wax. Applications for HX-80TM Latex include making flat molds for casting ornamental concrete, stone veneer, 2-dimensional architectural elements and wax candles. NOTE: Latex can be used for limited casting of some resins. The higher the exotherm of the casting material, the quicker the mold will degrade and become unusable.  Mold Max silicone rubbers would be a better choice for production casting of resins.

WARNING - Prop. 65

Allergies: Read label carefully. Do not use this product if you have known allergies to rubber latex. If you're unsure, bring the label to your doctor for their advice. If an allergic reaction occurs, stop use and seek medical help right away.